Acerpure

**Suitable for Acerpure Aqua WP1

Polypropylene & Carbon Block Composite Filter (PCF)
*removes particulates, sediments, residual chlrorine,

volatile organic compounds (VOCs)

**Suitable for Acerpure Aqua WP1

Granular Activated Carbon Filter (GAC)
*restores essential elements such as potassium, sodium, calcium, magnesium

Features:

• High Quality UK Technology Heating Element
• Triple Safety Protection
  • Built-in auto water flow-sensor device switch
  • Built-in 15 mA sensitivity electronic RCD
  • Upgraded Anti-scalding thermal safety design
• Electronic Variable Power Temperature Control
• Built-in Residual Current Device (RCD)
• 3-in-1 Compact Stop, Flow and Filter Valve
• Suitable for High and Low Water Pressure
• Stylish 5 Spray Patterns Hand Shower
• Splash Proof Protection IP25

DPDT Protection

• DP - Double Relay Highly Sensitive Electronic RCD, Cut-off Both Live & Neutral Power Supply. Prevents Electrocution & Lightning.
• DT - Double Thermal Safety Protection.
  • 55°C Anti-Scalding Thermal Cut Out.
  • 90°C Prevent Abnormal Overheat Thermal Cut Out

Specification:

**Suitable for Acerpure Cool Series C1 - AC530

• 3 in 1 HEPA Filter Filter
      Dimension (W*D*H)： 293 x 293 x 136.4 mm
      Net Weight: 0.583 kg

- The recommended replacement time for the filter is 2000 hours, but it still depends on your actual usage. Please replace the filter immediately when the filter indicator [ ] flashes to maintain the purification performance of this product.

- You can regularly place the filter in a ventilated place with sunlight for a period of time to avoid the activated carbon filter from absorbing too much harmful gas and causing odors.

- Steps to Change
1. After turning off the power and unplugging, remove the bottom filter cover by turning it counterclockwise (the arrow will point to the unlocked icon).
2. Take out the original filter and remove the AG+ silver coated filter.
3. Reinstall the AG+ silver coated filter on the new replacement filter before fitting it back into the purifier.
4. After installing the filter cover, turn the filter cover clockwise (the arrow will point to the lock icon), and make sure it is locked.
5. Turn on the purifier, press and hold the power button for 3 seconds to release the filter indicator flashing light.

Note: Please be sure to unpack the filter before replacing the filter.

**Suitable for Acerpure Aqua WP1

Reverse Osmosis Membrane Filter (RO)
*filters 0.0001 pm such as heavy metals, coliform, virus, microorganism, antibiotic

**Suitable for Acerpure Cool Series: Cool C2-AC551 & Pro P2-AP551

1. Against Viruses with HEPA Plus+

2. 4 in 1 HEPA Filter, Four-layer Protection

- Take control of your air quality with the 4-in1 HEPA filter and eliminate up to 99% of airborne bacteria 1, 99.97% of ultrafine dust, PM 1.0, and allergies.

- You can regularly place the filter in a ventilated place with sunlight for a period of time to avoid the activated carbon filter from absorbing too much harmful gas and causing odors.

- Steps to Change
1. After turning off the power and unplugging, carefully remove the back magnetic cover from the air purifier.
2. Take out the original filter, replace it with the new replacement filter and reinstall the filter cover.
3. Turn on the purifier, press and hold the power button for 3 seconds to release the filter indicator flashing light.


Note: Please be sure to unpack the filter before replacing the filter.

Features:

• High Quality UK Technology Heating Element
• Triple Safety Protection
  • Built-in auto water flow-sensor device switch
  • Built-in 15 mA sensitivity electronic RCD
  • Upgraded Anti-scalding thermal safety design
• Electronic Variable Power Temperature Control
• Built-in Residual Current Device (RCD)
• 3-in-1 Compact Stop, Flow and Filter Valve
• Suitable for High and Low Water Pressure
• Stylish 5 Spray Patterns Hand Shower
• Splash Proof Protection IP25
• With DC pump

DPDT Protection

• DP - Double Relay Highly Sensitive Electronic RCD, Cut-off Both Live & Neutral Power Supply. Prevents Electrocution & Lightning.
• DT - Double Thermal Safety Protection.
  • 55°C Anti-Scalding Thermal Cut Out.
  • 90°C Prevent Abnormal Overheat Thermal Cut Out

Specification:

Features:

• High Quality UK Technology Heating Element
• Triple Safety Protection
  • Built-in auto water flow-sensor device switch
  • Built-in 15 mA sensitivity electronic RCD
  • Upgraded Anti-scalding thermal safety design
• Electronic Variable Power Temperature Control
• Built-in Residual Current Device (RCD)
• 3-in-1 Compact Stop, Flow and Filter Valve
• Suitable for High and Low Water Pressure
• Stylish 5 Spray Patterns Hand Shower
• Splash Proof Protection IP25
• With DC pump

DPDT Protection

• DP - Double Relay Highly Sensitive Electronic RCD, Cut-off Both Live & Neutral Power Supply. Prevents Electrocution & Lightning.
• DT - Double Thermal Safety Protection.
  • 55°C Anti-Scalding Thermal Cut Out.
  • 90°C Prevent Abnormal Overheat Thermal Cut Out

Specification: